Panasonic BB-GT1500C - Manual (Page 34)

Making/Answering Calls (Handset)
34 For product assistance, visit www.globarange.com
For A assistance, visit www.joip.com
automatically when necessary. You can
also turn this feature on or off manually.
1 Press {MENU} during an outside
call.
2 Press {3} to select “Booster on”
or “Booster off”.
Note:
L
When this feature is turned off
manually during a call, it does not
automatically turn on again during the
same call.
L
While this feature is turned on:
– the battery operating time is
shortened (page 20)
– the maximum number of extensions
that can be used at a time may
decrease
Call share N
This feature allows you to join an
existing outside call.
When another unit is on an outside call,
press {TEL} or {IP} to select the line that
is being used for the call.
Note:
L
Multiple parties can join a conference
call. The possible number of
participating parties depends on the
current system usage. When another
participating party cannot join a
conversation, the busy tone sounds
and the handset displays “Busy”.
Call privacy N
Call privacy allows you to prevent other
users from joining your conversations
with outside callers. To allow other users
to join your conversations, leave this
feature off.
1 Press {MENU} during an outside
call.
2 Press {2} to select “Privacy on”
or “Privacy off”.
L When this feature is turned on,
“PRIV.” is displayed.
Note:
L
This feature will turn off after you hang
up the call.
Using the other line,
conference call N
When a call is being received on the
other line during a conversation, the
interrupt tones sound.
You can answer the 2nd call while
holding the 1st call. You can also
combine the landline call and internet
call to make a conference call.
Example: If you are using the landline
1 Press {HOLD} 2 times to put the 1st
call (landline) on hold.
2 Press {IP} to make or answer a 2nd
call.
L
To hold the 2nd call, press
{
HOLD} 2 times.
3 To hang up the 2nd call and
return to the 1st call (landline):
Press {TEL}.
To make a conference call:
Press {CONF}.
L
To hang up only one line, press
{
TEL} or {IP} for the party with
which you want to continue
talking.
L To put both lines on hold, press
{
HOLD}. To talk with only one
caller, press {TEL} or {IP} for the
party with which you want to
continue talking. To resume both
lines, press {CONF}.
Note:
L
If you subscribe to the Call Display
service, the 2nd caller’s information is
displayed as the call is being received
(page 43).
L To turn the interrupt tone off, see page
51.
GT15xxC.book Page 34 Tuesday, July 24, 2007 7:17 PM