PYLE Audio PHRM30 User Manual
Page 9
18
Heart Rate Belt
1.Hold the Heart Rate Belt firmly.Insert a coin into the slit of the compartment lid and
turn it clockwise .The lid should come off easily.
(Remove used battery CR2032)(Diagram 2)
2.Gently place the battery into the battery slot of the battery compartment.(Diagram 3)
3.Put the compartment lid back into place and tighten it firmly by turning it
anti-clockwise with the help of coin.
SCREW
BACK COVER
O Ring
CR2032
BATTERY
1. The battery compartments located at the back of the watch.
2. To install/replace the battery, unscrew the battery compartment with the screw driver
and simply slide out afterwards.
3. Take out the old battery and dispose of properly.
4. Gently place a new battery into the battery slot of the battery compartment, making
sure that the poles are correctly placed.
5. Screw back the battery compartment, when finished as in the diagram below