Pioneer DV-350 EN - Manual (Page 10)

Connecting Up 02
10
En
4 AC IN
Connect the supplied power cord here, then
plug into a power outlet.
5 VIDEO OUT
This is a standard video output that you can
connect to your TV or AV receiver using the
supplied audio/video cable.
6 S (S-Video output)
This is an S-video output that you can use
instead of the video output described in
5
above.
7 DIGITAL AUDIO OUT – OPTICAL
(DV-454 only)
This is a digital audio output for connection
to a PCM, Dolby Digital, DTS and/or MPEG-
compatible AV receiver that has an optical
digital input.
Connect using a commercially available
optical digital audio cable.
• You may find it useful to have the
manuals supplied with your other
components handy when connecting
this player.
• If you come across any unfamiliar terms
in this section of the manual, take a look
at the Glossary starting on
page 51.
When connecting this player up to your
TV, AV receiver or other components,
make sure that all components are
switched off and unplugged.
1 DIGITAL AUDIO OUT – COAXIAL
This is a digital audio output for connection
to a PCM, Dolby Digital, DTS and/or MPEG-
compatible AV receiver that has a coaxial
digital input.
Connect using a commercially available
coaxial digital audio cable.
2 AUDIO OUT L / R
This pair of analog audio outputs connects to
your TV, AV receiver or stereo system. Even if
you are connecting up one of the digital
outputs, we still recommend you connect
these jacks.
Use the supplied audio/video cable when
connecting these jacks. Match the colors of
the jacks and cables for correct stereo
sound.
3 AV CONNECTOR (RGB) - TV
This is a combined audio and video output
for connection to a TV that has a SCART
input. Connect using a SCART cable. The
type of video output can be switched to suit
your TV. See
page 12 and 41.
Rear panel connections
DIGITAL AUDIO OUT
S
L
R
VIDEO OUT
COAXIAL
OPTICAL
AUDIO OUT
AV CONNECTOR (RGB)-TV
1 2 3 4
5 6 7