Planet Technology ADSL 2/2+ Router ADE4400v2 - Manual (Page 44)

3.9.2 Dynamic Routing
Go to Interface Setup -> Internet to select Dynamic Route as you need.
The dynamic routing feature of the router can be used to allow the router to
automatically adjust to physical changes in the network's layout. The router uses the
dynamic RIP protocol. It determines the route that the network packets take based on
the fewest number of hops between the source and the destination. The RIP protocol
regularly broadcasts routing information to other routers on the network.
3.9.3 Routing Table
Go to Advance Management -> Routing to see the Routing Table.
The Routing table allows you to see how many routings on your routing table and
interface information
44