Video 2 input video 1 input – PAC VCI-X2 User Manual
Page 2
Video 1 on/off switch
Blue: + 12 volt
reverse light input
(Video 2)
Ground output
(Not Used)
White:
Ground output
(Not Used)
White:
Green: (-) Parking
Brake Connection
DB9 connector
Molex plug
with striped wires
towards Navigation
Display
Molex plug
with solid colors
towards Navigation
Control unit
R
G
B
RGB GND
RGB SYNC
N
AVIG
ATION
CONTROL UNIT
Navigation Display
or
Display Control Unit
Red: +12 Switched
Black: Chassis Ground
GREEN
RED
BLUE
YELLOW
BLACK
BLUE/WHITE
RED/BLACK
GREEN/BLACK
YELLOW/BLACK
BLACK/WHITE
Navigation wire colors will
vary from vehicle to vehicle.
Shield
Cut Factory R,G,B, and SYNC wires
Video 2 Input
Video 1 Input
DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the VCI-X2 parts be held liable for consequential damages
sustained in connection with the VCI-X2. The manufacturer and it’s distributors will not, nor will they authorize any representative or any other
individual to assume obligation or liability in relation to the VCI-X2 other than its replacement.