Paradyne 7112 - Manual (Page 106)

MIB Descriptions
C-4 7112-A2-GB20-10 March 1998
Table C-2. Interfaces Group Objects (2 of 5)
Object Setting/Contents Description
ifDescr
( ifEntry 2)
1.3.6.1.2.1.2.2.1.2 Supplies text for each
Interface:
H Terminal
H Ethernet
H DS1 Network
H User Data Port
H FDL
Text Strings for each interface:
H “Terminal Port; PARADYNE DS1
Leased Line DSU/CSU; Hardware
Version [
Hardware Revision]”
H “Ethernet Port; PARADYNE DS1
Leased Line DSU/CSU; Hardware
Version [
Hardware Revision]”
H “DS1 Network; PARADYNE DS1
Leased Line DSU/CSU; Hardware
Version [
Hardware Revision]”
H “User Data Port; PARADYNE DS1
Leased Line DSU/CSU; Hardware
Version [
Hardware Revision]”
H “FDL Channel; PARADYNE DS1
Leased Line DSU/CSU; Hardware
Version [
Hardware Revision]”
ifType
( ifEntry 3 )
1.3.6.1.2.1.2.2.1.3 Identifies the interface
type based on the
physical/link
protocol(s), right below
the network layer. Supported values:
H ethernetCsmacd(6) – Used for the
Ethernet port.
H other( 1 ) – Used for the DS1
network.
H SLIP(28) – Used for the FDL
connection
H rs232( 33 ) – Used for the Terminal
port.
H v35( 45 ) – Used for the User Data
port.
H DS1(18) – Used for the Network
and DTE Drop/Insert T1 interfaces.
ifMtu
( ifEntry 4 )
1.3.6.1.2.1.2.2.1.4 Identifies the largest
datagram that can be
sent or received on an
interface (Ethernet port
or FDL). Number of octets.