Palm TapWave Zodiac - Manual (Page 100)

U s i n g D a t e B o o k
Setting the alarm
Using Your Zodiac Console 100 100 100 100
•
If you change the date of an occurrence of a repeating event (e.g., from
January 14 to January 15) and apply the change to all occurrences, the
new date becomes the start date of the repeating event. Your console
adjusts the end date to maintain the duration of the event.
•
If you change other repeat settings (for example, time, alarm, private)
of a repeating event and apply the change to all occurrences, your
console creates a new event. The start date of this new event is the day
on which the setting is changed. Past occurrences (prior to the day of
the change) are not changed.
•
If you apply a change to a single occurrence of a repeating event (e.g.,
time), that occurrence no longer shows the Repeat icon.
SSSSetting the etting the etting the etting the aaaalarm larm larm larm
The Alarm setting lets you set an audible alarm for events in your Date Book,
and display a reminder message on-screen. For untimed events, only the
reminder message appears.
Setting an alarm for an event Setting an alarm for an event Setting an alarm for an event Setting an alarm for an event
You can set an alarm for minutes, hours, or days before an event. When you
set an alarm, an Alarm icon appears to the far right of the event with the
alarm.
You can also set a silent alarm for untimed events that displays a reminder
message on-screen before the day of the event. The alarm triggers at the
specified period of minutes, hours, or days before midnight of the day on
which the untimed event begins.
For example, you set a 5-minute alarm for an untimed event that occurs on
February 4. The reminder message appears at 11:55 p.m. on the night of
February 3. The reminder remains onscreen until you turn on your console
and tap OK to turn off the reminder.
1. Tap the event to which you want to assign an alarm.
2. Tap Details.
3. Check the Alarm box.
The default setting, 5 Minutes, appears.