PYLE Audio PLRG23C - Manual (Page 3)

P / N : 570-281804-03
Page. 3
11. LOCAL/DX
Press this button to prevent strong local stations from overlapping weaker stations. For
normal operation, press this button again for distance.
12. CD CHANGER / PAUSE CONTROL
Press this button to control the optional CD Changer. Press the same button again
to pause the disc played and the circle disc is flashing on display.
13. BAND SELECTOR
Each time this button is pressed, the radio band is changed.
The indication "FM1", "FM2", "FM3", "MW1" or "MW2" will appear on the display panel
according to your selection.
14. STATION PRESET BUTTON
The PRESET BUTTONS on the unit are used to store station frequencies which you
may wish to recall. Each preset button can store FM1, FM2, FM3, MW1, MW2 station
frequency. Pressing the button momentarily recalls the station frequency which was
memorized. There are 6 preset buttons, giving you capability of storing 18FM/12MW.
NOTE: When the preset button to be memorized is kept pressed for more than 2
seconds, the receiving station frequency will be stored in the button pressed. After this,
the memorized station can be recalled by tapping that button once.
On CDC Mode
Preset knob 1, press this button to search the disc numbers ahead.
Preset knob 2, press this button to search previous disc numbers.
Preset knob 3, press this button to repeat the specific track on the currently disc "RPT".
Preset knob 4, press this button to introduce the first 10 seconds of all the tracks on the currently selected disc
Preset knob 5, press this button to select disc randomly - Disc shuffle play.
15. PRE-SCAN/AUTO-STORE BUTTON
This button allows you to enjoy "Preset Memory Scan" function by pushing it within 2
seconds, and allows you enjoy "Auto Memory" function at pushing it continuously more
than 2 seconds.
* PS (PRESET MEMORY SCAN )
It calls the memorized station frequencies ( from 1-6 ) automatically every 5 seconds.
* AS (AUTO-STORE MEMORY )
I t s e a r c h e s a l l s t a t i o n f r e q u e n c i e s u p w a r d a n d m e m o r i z e a u t o m a t i c a l l y 6 s t a t i o n s b y
catching the frequency which has scan-stop level strong on "LO" mode, weaker signal on "DX" mode or
over at the time, the memorized station is shown on LCD as "CH1...6".After memorizing, auto memory
function will be changed to "Preset Memory Scan" function automatically.
16. AUDIO SELECTOR
Press this button to select "VOLUME/BASS/TREBLE/BALANCE/FADER" adjustment modes.
Each time button is pressed, accessed selection is displayed and + or - to adjust level as
desired.
17/18. AUDIO LEVEL Down Control ( - Button ) / AUDIO LEVEL Up Control ( + Button )
With the exception of VOLUME, to access all other adjustment modes "BASS/TREBLE/BAL/
FAD", first press SEL button then press the + or - button for selective audio control.
• VOLUME - Press + button to increase, or - to decrease sound level.
• BASS - While "BAS" is being displayed, press + to increase or - to decrease the bass level.
• TREBLE - While "TRE" is being displayed, press + button to increase or - to decrease
the treble level.
• BALANCE - While "BAL" is being displayed, press + or - button to level balance of speaker
right or left.
• FADER - While "FAD" is being displayed, press the AUDIO CONTROL + or - button to level
balance of front speakers and LINE OUT jacks.
19. FAST FORWARD/REWIND BUTTON
At the end of tape in fast forward or rewind, the unit will automatically select play mode.
To release either fast forward or rewind button from the lock position, push in the other
button approximately half-way. During cassette play, press the fast forward and rewind
buttons simultaneously and the reverse side of the tape will play automatically.