Panasonic AG-1350P - Manual (Page 12)

12
TV
VCR
VOLUME
AV
VCR/TV
OSD/DISPLAY RESET/CANCEL
PICTURE MODE
REC
NAVI
r W
s X
W
X
SEARCH INDEX
OK
AUDIO
∫
1
3
2 1 5 6
9 ¥ :
Н
Н
; /D
MENU
TIMER
Á
PROG./CHECK SPEED
ON
r r
s s
OFF
r
s
DATE
W
X
4
1 2 3 4
JET REW
DIRECT REC
CH
6
¥
Storing TV Broadcasts in your VCR
Auto Tuning Using the On
Screen Display
The VCR is tuned automatically by Plug in Auto
Tuning. However, Auto Tuning using the On
Screen Display should be performed according
to the following method if necessary.
Notes:
≥
Auto Tuning searches for TV stations from
VHF minimum to UHF maximum and
memorizes every tuned program position.
Other program positions are skipped.
≥ Auto Tuning may take three or more minutes
to complete its search.
≥ If the VCR is not correctly tuned by Auto
Tuning, follow the procedure on the next
page.
Preparations
≥
Confirm that the TV is on and the VCR
viewing channel is selected.
≥ Turn on the VCR and select any program
position except A1 or A2.
≥ Press VCR/TV to select the VCR mode.
Operations
1 Press MENU.
2 Select CHANNEL SET
by pressing 3 or 4 and
then press OK.
3 Select ANTENNA
SYSTEM by pressing
3
or 4 and then press
OK.
4 Select the desired
system by pressing 3 or
4
and then press
MENU.
5 Select AUTO by
pressing 3 or 4 and
then press OK.
≥
When Auto Tuning is
completed, the on
screen display
disappears and the
lowest channel position
at which a broadcast
can be tuned in is
received.
AUTO CHANNEL SET
PROCEEDING
END :MENU
2
LANGUAGE
CLOCK SET
≥ CHANNEL SET
SELECT
END : , OK
:MENU
OSD MENU
OPTION
SELECT
END :
:MENU
CATV
ANTENNA SYSTEM
≥ TV
≥ AUTO
SELECT
END : , OK
:MENU
CHANNEL SET
ANTENNA SYSTEM
MANUAL
≥ LANGUAGE
SELECT
END : , OK
:MENU
OSD MENU
CLOCK SET
CHANNEL SET
OPTION
SELECT
END : , OK
:MENU
CHANNEL SET
≥ ANTENNA SYSTEM
AUTO
MANUAL
On Screen Display