Planet Technology 85M Powerline to Ethernet Bridge with 4-Port Switch PL-420 - Manual (Page 14)

Chapter 3: Configuration
Overview
The PL-420 uses 56-Bit DES encryption to block outside access. The key is set
by using the Configuration Utility on the CD. By default, the protection is enabled,
however, it is recommended to change the default network password. All your
powerline devices must use the same network password in order to be
connected together.
Diagnose Powerline network
Part 1: Diagnose a Local Powerline device
Double click the PowerPacket Utility icon on your desktop, and utility screen will
show up as below:
14