Panasonic DIGA DMR-EZ47V - Manual (Page 79)

79
RQT8853
Ref
erence
The display is dim.  Change “Front Display” in the Setup menu. 50
“12:00A” is fl ashing on the unit’s
display.  Set the clock. 48, 66
The recording time display, the
copying process display, and
the displayed recording times
of MP3s are different from the
actual time.  Times shown may disagree with actual times. −
 [-R] [-R\DL] [+R] [+R]DL] The remaining capacity does not increase
even if recordings are deleted.
−
 Available recording space on a DVD-RW (DVD-Video format) or
+RW disc increases when you delete the last recording (space may
increase slightly when you delete other recordings).
−
 If you record or edit about 200 times or more, the remaining capacity
of DVD-R, DVD-R DL, +R, or +R DL is reduced and then recording
or editing may be disabled (for the second layer on DVD-R DL and
+R DL, this happens after about 60 times).
−
 The time during fast forward and rewind, or the process during copy
may not be displayed accurately.
−
Compared to the actual
recorded time, the elapsed time
displayed is less.  The displayed recording/play time is converted from the number of
frames at 29.97 frames (equal to 0.999 seconds) to one second.
There will be a slight difference between the time displayed and the
actual elapsed time (e.g., actual one-hour elapsed time may display
as approximately 59 minutes 56 seconds). This does not affect the
recording.
−
The following does not indicate a problem with the unit:
 Regular disc rotating sound.
 Poor reception due to atmospheric conditions.
 Image disturbance during search.
 Periodic interruptions to the reception due to satellite broadcasting breaks.
 Operations not working due to a poor-quality disc. (Try again using a Panasonic disc.)
 The unit freezing due to the activation of one of its safety devices (¼ 78, To restore the unit if it freezes).
No power.  Insert the AC power supply cord securely into a known active AC
outlet.
55 to 57
The unit switches to standby
mode.  This is a power saving feature. Change “Off Timer” in the Setup
menu to “Off” to always keep the unit on.
48
 One of the unit’s safety devices is activated. Press [/I POWER] on
the main unit to turn the unit on.
−
The power is turned off
automatically.  If you connected this unit to an “HDAVI Control” compatible TV with
an HDMI cable, this unit will be automatically turned off when the TV
is turned off.
32
General Issues Power
General Issues Displays
Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the
solutions indicated in the chart do not solve the problem, refer to “Customer Services Directory” on page 95.
Page
Page