Panasonic DIGA DMR-EZ47V - Manual (Page 18)

18
RQT8853
To cancel a scheduled recording in
progress
 to select “Stop recording”,
then
ENTER
To release the unit from recording
standby
(Before recording starts)
Check, Change, or Delete Programs
– See “Tips” ( ¼ right) for explanation of icons
displayed.
,  to select the program.
4a
CANCEL
RESET
or
DELETE
to delete.
– You cannot delete programs that are currently
recording.
4b ENTER
to modify the program.
, , ,  to make changes,
then
ENTER STOP
– Confi rmation screen appears.
Tips
You can enter up to 16 programs a month in advance.
Channel No Date On Check Off Drive Mode
Schedule List DVD VHS
5/ 4 Fri 6:11 PM
Remaining Recording Time 0:33 XP 2:00 SP
New Scheduled Recording
 Schedule List screen icons
:
Currently recording
: Programs are overlapped. Recording of the program with
the later start time starts when the earlier program fi nishes
recording.
: You stopped a weekly or daily scheduled recording. The
icon disappears when the next scheduled recording starts.
: The disc was full. (not enough space)
: The TV program may not be recorded due to copy-protect
or ratings. (disc)
: Recording stopped (Dirty disc, etc.)
PG! : Recording may become impossible when a wrong
password is entered through the unit’s parental rating
setting procedure.
Check
OK:
Recordable (disc)
¼ (Date): The last day of daily or weekly recording. (disc)
!:
It may not be possible to record because:
– the disc is write-protected.
– there is no more space left (disc).
– the number of possible recordings has reached its
maximum (disc).
Overlap: When the date and time overlap with another scheduled
recording, only a part of the program can be recorded
(disc).
--: When the drive is set to VHS, “--” is displayed.
POWER
DVD/VHS
– The unit turns on and “ ” on the unit’s
display goes out.
POWER
DVD/VHS
– “ ” lights on the unit’s display.
The scheduled recording list can be viewed even when
the unit is off.
Notes
Recording stops and the scheduled recording is deleted. (Daily
and weekly schedules remain and scheduled recording will start as
programmed.)
Be sure to press [  DVD/VHS POWER] to return the unit to standby
mode before the scheduled recording time. Scheduled recording will
work only if “
” is displayed.
Advanced Scheduled Recording
Notes
 Recording may fail if there are changes to the station’s
programming.
 The password screen appears when setting parental ratings
( ¼ 52). Unless you enter the correct password, recording the
program with parental ratings may fail.
DRIVE
SELECT
to select the drive.
DRIVE
SELECT
to select the drive (DVD or
VHS).