Advanced disc playback – Panasonic DIGA DMR-EZ47V User Manual
Page 20
20
RQT8853
[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW]
[DVD-V] [-RW‹VR›]
[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW]
[DVD-V] [-RW‹VR›]
Slow-motion Play
Frame-by-Frame Viewing
[RAM]
[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
Use to skip in 1-minute or 10-minute increments.
Time Slip
Create Chapters
, to select the time, then
ENTER
–
Each press of
or
advances the interval
by 1 minute (press and hold for 10-minute
intervals).
While paused
or
– There are 5 slow-motion speeds. Each press
increases the speed.
– Press [
PLAY] to restart normal playback.
While paused
ENTER
–
Each press shows the next or previous frame.
–
Press and hold to advance or reverse frame-by-
frame in succession.
–
Press [
PLAY] to restart normal playback.
Available audio will differ based on disc type. See below.
e.g.:
[RAM]
“Stereo” is
selected.
Play
Stereo
DVD-RAM
[RAM] [-RW‹VR›] and DivX
Stereo
Mono L Mono R
[RAM] [-RW‹VR›] When playing an analog multilingual
broadcast, you can choose between Main Audio and
SAP Audio.
Main Audio
SAP Audio
[DVD-V\
This allows you to change items like the audio channel
number and the soundtrack language (
¼ 42).
Soundtrack
1 ENG
e.g., English is the selected language.
Changing Audio during Playback
AUDIO
A
to select the audio.
Notes
If continued for approx. 5 minutes, slow-motion play pauses
automatically (except
[DVD-V]).
[RAM] [-R] [-R\DL] [-RW‹V›] [+R] [+R]DL] [+RW] [-RW‹VR›]
Skips 1-minute forward with each press.
CM Skip
During playback
CM SKIP
During playback
CHAPTER
CREATE
Tips
You can skip to the start of a chapter by pressing [
, ].
Notes
If you cannot change the audio type when you have used only
an optical digital audio cable for connection, set “Dolby Digital” to
“PCM” (
¼ 50). Alternatively, you may connect to an amplifi er or
system component with an audio cable and change the input on the
amplifi er or system component to suit the connection (
¼ 60).
During playback
TIME SLIP
Advanced Disc Playback