Panasonic AJ-P - Manual (Page 33)

33
001 LOCAL ENA
0000
0001
0002 DIS
ST&EJ
ENA
For setting the buttons on the front panel which can be operated when the
LOCAL/MENU/REMOTE switch is at the REMOTE position.
0: None of the buttons can be operated.
1: Only the STOP and EJECT buttons can be operated.
2: All of the buttons with the exception of COUNTER and RESET can be operated.
002 TAPE TIMER
0000
0001 ±12h
24h
For setting how the time is to be displayed on the CTL counter display.
0: 12-hour display
1: 24-hour display
003 REMAIN SEL
0000
0001
0002
0003 OFF
2L
1L
R/TTL
For setting the superimposing of the remaining tape time and/or total tape duration
displays onto the VIDEO OUT2 connector.
0: No displays are superimposed.
1: The remaining tape time is displayed on the second line.
2: The remaining tape time is displayed on the first line.
3: The remaining tape time is displayed on the first line and the total tape duration
on the second line.
<Notes>
O The information will not be displayed when 2L is set and TIME is selected as the
menu item No.006 [DISPLAY SEL] setting.
O The remaining tape time will not be displayed when R/TTL is set and TIME is
selected as the menu item No.006 [DISPLAY SEL] setting.
005 SUPER
0000
0001
0002
2 0003
2 0004
2 0005
2 0006
OFF
CMPST
CMPNT
2 SDSDI
2 HDSDI
2 CPS&SD
2 CPN&HD
For setting the superimposing of the displays onto various connectors.
0: The displays are superimposed onto none of the output connectors.
1: The displays are superimposed onto VIDEO OUT2.
2: The displays are superimposed onto the HD component output (Y).
3: The displays are superimposed onto SD SDI OUT.
4: The displays are superimposed onto HD SDI OUT.
5: The displays are superimposed onto VIDEO OUT2 and SD SDI OUT.
6: The displays are superimposed onto the HD component output (Y) and HD SDI
OUT.
BASIC
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of settings
“ ” indicates the factory setting.
Setup menus
<Note>
Even when OFF is selected as the menu item No.005 [SUPER] setting, the superimposing will be displayed in
accordance with what is set using menu item No.006 [DISPLAY SEL] during the menu settings. Once the menu
settings are exited, the display follows the setting selected for menu item No.005 [SUPER].
2 This appears when the AJ-YA120AG (optional accessory) has been installed.