Panasonic AJ-P - Manual (Page 46)

46
Setup menus
700 AUDIO IN SEL
0000
0001
0002 INTSG
ANA
SDI
For setting the audio signal input (in all the channels simultaneously).
0: The internal signal is generated.
1: The input is fixed to analog signals.
2: The input is fixed to SDI signals.
<Notes>
O The input signals of the channels when analog signals are supplied are
recorded onto the audio tracks below on the tape.
CH1 input
5 CH1 and CH5 track
CH2 input 5 CH2 and CH6 track
CH3 input 5 CH3 and CH7 track
CH4 input 5 CH4 and CH8 track
O When “1394” is selected as the menu item No.600 [VIDEO IN SEL] setting, the
audio input signals will also be supplied from the DV connector (digital video
interface).
701 CH1 IN LV 0000
0001
0002
0003 4dB
0dB
–20dB
–60dB
For setting the reference level of the analog audio input (CH1).
702 CH2 IN LV 0000
0001
0002
0003 4dB
0dB
–20dB
–60dB
For setting the reference level of the analog audio input (CH2).
703 CH3 IN LV 0000
0001
0002
0003 4dB
0dB
–20dB
–60dB
For setting the reference level of the analog audio input (CH3).
704 CH4 IN LV 0000
0001
0002
0003 4dB
0dB
–20dB
–60dB
For setting the reference level of the analog audio input (CH4).
706 CH1 OUT LV 0000
0001
0002 4dB
0dB
–20dB
For setting the reference level of the analog audio output (CH1).
707 CH2 OUT LV 0000
0001
0002 4dB
0dB
–20dB
For setting the reference level of the analog audio output (CH2).
708 CH3/L OUT LV 0000
0001
0002 4dB
0dB
–20dB
For setting the reference level of the analog audio output (CH3).
709 CH4/R OUT LV 0000
0001
0002 4dB
0dB
–20dB
For setting the reference level of the analog audio output (CH4).
AUDIO
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of settings
“ ” indicates the factory setting.