Panasonic AJ-P - Manual (Page 54)

54
Specifications
[GENERAL]
indicates safety information.
Power supply:
AC (100-240) V, 50/60 Hz
DC 12V, 6.6 A
Power consumption:
69 W (main unit only)
97 W (when AJ-YA120AG, AJ-YAD120AG are
installed)
Ambient operating temperature:
41°F to 104°F (5°C to 40°C)
Ambient operating humidity:
10% to 80% (no condensation)
Weight:
17.38 lb (7.9 kg)
Dimensions (WkHkD):
8 7 / 16 k 5 1 / 4 k 16 7 / 8 inches (214k132k428 mm)
Recording format 2 1, 22 :
DVCPRO HD-LP
Recording video signals 2 1, 22 :
1080i/59.94 Hz, 720p/59.94 Hz, 1080i/50 Hz
switchable
Recording audio signals 2 1 :
48 kHz, 16 bits, 8 channels
Recording tracks 2 1 :
O Digital video/audio: Helical track
O Time code: Helical track (sub code area)
O
Cue signal: 1 track
O
Control (CTL) signal: 1 track
Playback formats:
DVCPRO HD-LP, DVCPRO HD, DVCPRO50,
DVCPRO P, DVCPRO, DV-SP, DVCAM
Tape speed:
67.64 mm/sec. (in 59.94 Hz mode)
67.70 mm/sec. (in 60/50 Hz mode)
Recording time:
92 min. (when using AJ-HP92ELG)
Tapes used:
Metal tapes
FF/REW time:
Approx. 2 min. (when using AJ-HP92ELG)
[VIDEO]
$ Digital video
Sampling frequency
Y: 74.25 MHz
P
B /P R : 37.125 MHz
Quantizing:
8 bits
Video compression system:
DCT + variable length code
Video compression ratio:
1:6.7
Error correction:
Reed-Solomon product code
Video recording bit rate:
100 Mbps
$ Video input connectors 2 1
HD serial digital input:
BNC k1
(compliant with SMPTE 292M/296M/299M
standards)
Reference input:
Black burst/HD tri-level sync automatic switching
BNC k2 (loop-through k1)
75
Ω termination ON/OFF switchable
$ Video output connectors
HD serial digital output 2 1 :
BNC k2
(compliant with SMPTE 292M/296M/299M
standards)
(information superimposing ON/OFF)
SD serial digital output 2 1 :
BNC k1 (compliant with SMPTE 259M-C/272M-
A, ITU-R BT.656-4 standards)
(information superimposing ON/OFF)
Analog composite output:
BNC k2
VIDEO1
2 3 , VIDEO2
(information superimposing ON/OFF)
HD analog component output:
BNC k3 2 3 (Y/P B /P R , R/G/B switchable)
(information superimposing ON/OFF)
2 1: This functions only when the AJ-YA120AG (optional
accessory) is installed.
2 2: This functions only when the AJ-YAD120AG (optional
accessory) is installed.
2 3: The VIDEO1 and HD analog component Y outputs are
switched.