Switching the seek mode, Switching the reception mode, Using the missed, received and dialed call – Pioneer AVH-P2300DVD User Manual
Page 42: Lists on the optional bluetooth adapter, Setting automatic answering, Switching the ring tone, 12 detailed instructions
% Pause and play
Playing and pausing.
Switching the seek mode
There are two seek tuning settings, one is
Seek HD (Digital broadcasting stations seek)
and the other is
Seek All (normal seek).
Seek All
—Seek HD
Switching the reception mode
If the reception for a digital broadcast be-
comes poor, this unit automatically switches
to the analog broadcast of the same fre-
quency. If this function is set to
D/A Auto, the
tuner switches between digital broadcast and
analog broadcast automatically. If this func-
tion is set to
Analog, the tuner will only re-
ceive analog broadcasts.
D/A Auto
—Analog
Note
If
SEEK MODE is set to Seek HD and BLENDING
is set to
Analog, the tuner cannot receive broad-
casts. In this case, the seek mode or reception
mode is changed automatically as follows:
! When SEEK MODE is set to Seek HD, if you
switch
BLENDING from D/A Auto to Analog,
SEEK MODE is changed to Seek All.
! When BLENDING is set to Analog, if you
switch
SEEK MODE from Seek All to
Seek HD, BLENDING is changed to
D/A Auto.
Using the missed, received
and dialed call lists on the
optional Bluetooth adapter
The 3 most recent calls dialed, received, and
missed are stored in the memory. You can
browse them and call numbers from these
lists.
1
Switch to the call history list.
Refer to Introduction of Bluetooth telephone op-
erations on page 26.
2
Touch a phone number or name (if en-
tered) you want to call.
3
Make the call.
Refer to Introduction of Bluetooth telephone op-
erations on page 26.
4
End the call.
Refer to Introduction of Bluetooth telephone op-
erations on page 26.
Setting automatic answering
If this function is on, this unit automatically
answers all incoming calls.
% Turn automatic answering on or off.
Refer to Introduction of Bluetooth telephone op-
erations on page 26.
Switching the ring tone
You can select whether or not to use this
unit
’s ring tone. If this function is set to on,
the ring tone for this unit will sound.
1
Connect your cellular phone to this
unit.
2
Turn ring tone on or off.
Refer to Introduction of Bluetooth telephone op-
erations on page 26.
En
42
Section
12
Detailed instructions