Panasonic SCPTX7 User Manual

Page 89

Advertising
background image

RQ

T

8

9

2

6

89

This function will restore the backup data that was saved on
your PC to this unit.
If the HDD requires service, please wait until the HDD has

been repaired before restoring the backup to the HDD.

Perform “Preparation” and “Settings to check on the PC” as
described on page 87.

1

Press [SETUP].

2

Press [

3 4] to select “Other Setup” and press

[ENTER].

3

Press [

3 4] to select “Maintenance” and press [1].

4

Press [

3 4] to select “Backup/Restore” and press

[ENTER].

5

Press [

3 4] to select “Restore” and press [ENTER].

6

Press [

3 4] to select “PC Name” and press [ENTER].

When the PC name is displayed
The PC name and other information that was used when
previous backups and imports (

➜ page 40) were

performed may be displayed. In this case, check the PC
name again, and if necessary, follow the steps below to
make changes.

7

Enter the characters (

page 69).

Input the “User Name” and “Password” in steps 6 and 7 in
the same manner.

8

Press [

3 4 2 1] to select “Restore” and press

[ENTER].
Restore begins.
A message will be displayed, indicating that restore is
complete. The unit will briefly stay this way, and then it will
turn off automatically shortly after.

To return to the previous screen
Press [RETURN].

To cancel restore
1 Press and hold [

Í] during restoring.

2 Press [

2 1] to select “Yes” and press [ENTER].

≥This unit is turned off and the restore is canceled.
≥If restore is canceled before completion, all progress up to

the point of cancelation will not be recorded and the HDD
will be completely empty. Restore this unit again later.

[Note]
≥Restore may be canceled if your PC is turned off in an

irregular manner or is forced to shut down due to errors. In
this situation, restore again from the beginning. However,
backups may not restore when the backup data contains
abnormalities.

Restoring backed up data

Restoring the backup data to the HDD will reset the
HDD (no tracks on the HDD). If restoring fails, the
content of the HDD will be lost. When restoring the
backup data, therefore, please exercise the utmost
caution.

Restore

PC Name

User Name

Password

ENTER

Cancel

Restore

Cancel

No

Yes

Restore

This function will pause and the power will
turn off immediately.
Do you want to continue?

ENTER

Con

v

enie

nt fun

c

tion

s

A

d

v

a

n

ced

O

p

er

at

io

ns

PTX79P.book Page 89 Monday, April 9, 2007 9:24 AM

Advertising