Panasonic Laser Fax UF-6000 - Manual (Page 198)

198
Chapter 8 Reading Reports/Lists
(6) Communication result “OK” indicates that the communication was successful.
“Busy” indicates that the communication has failed because of busy
line.
“Stop” indicates that the Stop key was pressed during communication.
“P-OK” indicates that memory overflow occurred while storing the
documents into the memory for transmission but successfully
stored document(s) was sent.
“R-OK” indicates that the Relayed XMT was successful.
“B-OK” indicates that the Batch transmission was successful.
“M-OK” Indicates that the memory reception/ substitute reception was
successful.
“- -” indicates LAN transmission.
“3-digit Info Code”
indicates that the communication has failed.
Refer to Information Codes (see page 212).
In this case, the machine will print the attached report with the
first page of your document as shown on the previous page.
(7) Key name or mark mark indicates dialling by direct number dialling.
(8) Recorded name in the
Address Book, direct
dialling number, or Email
address Recorded name in the Address Book, direct dialling number, or Email
address
(9) Number of pages
transmitted or received The 3-digit number is the number of pages successfully transmitted or
received.
When the documents are stored into the memory, two 3-digit numbers will
appear. The first 3-digit number represents the number of pages successfully
transmitted. The second 3-digit number represents the total number of pages
that were attempted to be transmitted.
(10) Duration of
communication Duration of Communication
No. Item Explanation