Panasonic Laser Fax UF-6000 - Manual (Page 219)

219
Chapter 9 Solving Problems
Checking the Telephone Line
If you do not hear a dial tone when “Monitor” is selected after pressing the Fax key, or the incoming
call does not ring on your machine (no automatic receive), check the telephone line by following the
procedures below.
1
Unplug the Telephone Line Cable from
the telephone jack that was supplied
by the telephone company.
2
Plug a different regular telephone into
the same telephone jack.
3
Check for a dial tone through the
handset. If there is still no dial tone,
report it to your local telephone
company.
or
Call from another telephone to this
number. If the telephone does not ring,
report it to your local telephone
company.