Panasonic KV-S7075C - Manual (Page 43)

Replacing Consumable Roller Modules
43
∫ Replacing Double Feed Prevention Roller
1
Turn the power off.
2
Push the ADF door release to open the
ADF door.
3
Open the double feed prevention
conveyor in the direction of the arrow
shown in the figure by using the indent
on the back side.
4
Remove the double feed prevention
roller, pulling up the shaft in the
direction of the arrow.
5
Take out the new double feed
prevention roller in the optional roller
exchange kit (KV-SS015).
ADF door
ADF door release
Double feed
prevention roller
Double feed
prevention conveyor
Indent