Panasonic SC-HT67 - Manual (Page 15)

15
RQT6191
Disc operations
Soundtracks
During play
Press [AUDIO].
The number changes each time you press the button.
≥ You can also use this button to turn the vocals on and off on
karaoke discs. Read the disc’s instructions for details.
≥ Refer to [B] on page 17 for audio signal type details.
≥ [VCD]
Audio changes as follows each time you press [AUDIO]:
LR
>L>R
^--------------}
This may not work with some discs.
Angles
“ANGLE” lights on the unit’s display when this is available.
During play
Press [ANGLE].
The number changes each time you press the button.
Using the disc manager
[CD] [VCD]
The disc manager allows you to choose one track or disc to play or to
play all five discs in succession.
1
While stopped
Press [DISC MANAGER] to select the
desired method.
Each time you press the button:
(1-TRACK): One track play
(1-DISC): Plays one disc.
(ALL-DISC): Plays five discs in succession.
(NORMAL): Normal play (off)
2
Select the disc and track.
≥ When selecting “1-DISC”, press [DISC] and [1]–[5].
≥ When selecting “1-TRACK”, press the numbered buttons.
To select a 2-digit number
Example: To select track 23: press [S10/ENTER] ➡ [2] ➡ [3].
You can also select the track by pressing [:] and [9].
3
Press [1] (PLAY).
To cancel disc manager
Press [∫].
To play a track or disc repeatedly
Press [REPEAT] during disc manager play.
Note
≥ You cannot use the disc manager while “RANDOM” or “PRGM” are on.
≥ When playing video CDs with playback control in the “A” or “ALL DISC”
mode, you can play the disc without having to operate the disc’s menus.
≥ The disc manager skips any DVD and MP3 discs that are loaded.
1 2
3/2.1 ch
Digital Î
1 English
Program play/Random play
[CD] [VCD]
While stopped
Press [PLAY MODE] to select the play mode.
The mode changes as follows each time you press the button.
Program play Random play
Normal play All disc random play
After selecting the mode, follow the steps for the mode.
Program play
To play a maximum of 24 tracks in a programmed order
Select tracks from any disc.
1
Press [DISC] and [1]–[5] to select the
disc.
2
Press the numbered buttons to select
a track.
≥ Repeat steps 1 and 2 to program other tracks.
≥ Step 1 is unnecessary when programming tracks on the
same disc.
3
Press [1] (PLAY).
Play now begins in the programmed sequence.
When play is stopped and the program contents are shown on
the display, you can also do the following.
≥
To add tracks
Repeat steps 1 and 2.
≥ To check program contents
Press [:] or [9].
≥ To clear tracks
Press [CANCEL] to clear the last track in the program, or press
[:] or [9] to select a track and press [CANCEL].
≥ To clear the whole program
Press [∫] so “CLEAR” is displayed. (If “CLEAR” is not displayed,
start and stop play, then press [∫] again.)
Note
Discs or tracks the unit cannot find can be programmed but are can-
celed during play. This is also the case if you program DVD-Video
and MP3 discs.
Random play
To play tracks on the current disc randomly
Press [1] (PLAY).
Play now begins in random order.
All disc random play
To play tracks on all discs randomly
Press [1] (PLAY).
Play now begins in random order.
≥
DVD and MP3 discs are skipped during all disc random play.
Normal play
The program or random mode is canceled (normal play mode is re-
stored) when:
–The unit is turned off.
–The disc is changed or removed.
–A source other than DVD/CD is selected.
The program is retained in memory.
DISC
PRGM RANDOM
RANDOM
ALL DISC
T
A
ALL DISC