Panasonic KX-TG5664 - Manual (Page 33)

Programming
For assistance, please visit http://www.panasonic.com/phonehelp 33
*1 If you subscribe to Caller ID service and want to view the caller’s information after lifting
up the handset to answer a call, turn off this feature.
*2 You can select whether or not key tones are heard when keys are pressed. Includes
confirmation tones and error tones.
*3 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone
(tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers.
*4 The flash time depends on your telephone exchange or host PBX. Consult your PBX
supplier if necessary. The setting should stay at “700ms” unless pressing {FLASH}
fails to pick up the call waiting call.
*5 Generally, the line mode setting should not be adjusted. If “Line in use” is not
displayed when another phone connected to the same line is in use, you need to
change the line mode to “A”.
*6 This feature allows the unit to automatically adjust the date and time setting when caller
information is received. To use this feature, set the date and time first.
Ring color
(Ringer indicator color) { 1}{4} { 1}: <Color1>=Amber
{
2}: Color2=Green
{
3}: Color3=Red
{ 4}: Multicolor
–
Ring count { 0}{6}{1} { 2}–{7}: 2–7 rings <4>
{
0}: Toll saver
r
Ringer tone (Handset)
*3
{
1}{2}
{
1}–{3}: Tone <1>–3
{
4}–{7}: Melody 1–4
–
Ringer volume (Handset) {
1}{1}
{
1}: Low {2}: Medium
{ 3}: <High> {0}: off
–
Set dial mode { 0}{5}{1} { 1}: Pulse
{
2}: <Tone> (page 17)
r
Set flash time
*4
{
0}{5}{2}
{
1}: <700ms> {2}: 600ms
{
3}: 400ms {4}: 300ms
{ 5}: 250ms {6}: 110ms
{
7}: 100ms {8}: 90ms
r
Set line mode
*5
{
0}{5}{3}
{
1}: A {2}: <B>
r
Time adjustment
*6
(Caller ID subscribers only)
{
0}{9}
{
1}: <Caller ID[auto]>
{
0}: Manual
r
Voice enhancer {
5}
{
1}: On {0}: <Off> –
Feature Feature
code Setting code System
setting
TG5664(e).book Page 33 Monday, March 6, 2006 11:15 AM