Panasonic AV-HS300 - Manual (Page 24)

24
2. Basic operations
2-7. Preset memory
Up to 10 panel settings can be stored in this memory (flash memory).
The table below lists the settings which are stored.
<Table of stored preset memory>
Item Description of setting Initial value (factory default)
Crosspoint A bus 1
B bus 2
KEY-S 4
KEY-F 5
AUX bus 1
Color background WHITE
Wipe Wipe pattern 4 (center)
Border width 4 (TBD)
Soft effect width 4 (TBD)
Border color YLW
Transition area BKGD/KEY selection BKGD
MIX/WIPE selection MIX
Auto transition time (BKGD) 60F
Auto transition time (KEY) 60F
Key Key type (TYPE) LIN
Key adjustment (ADJ) GAIN: 100 (TBD)
CLIP: 50 (TBD)
DENS: 100 (TBD)
Inversion ON/OFF OFF
Fill color GRN (TBD)
Edge color YLW (TBD)
Edge ON/OFF (TYPE) OFF
Edge width 4 (TBD)
User color User color 1 (HUE, SAT, LUM) 0, 0, 100 (TBD)
User color 2 (HUE, SAT, LUM) 355, 100, 7 (TBD)
User color 3 (HUE, SAT, LUM) 50, 100, 29 (TBD)
User color 4 (HUE, SAT, LUM) 0, 0, 0 (TBD)
STORE: This is used to store the panel settings in the preset memory.
 Press the [FUNC] switch to light its indicator, and then press the [MEM] switch to display the MEM menu.
The PSMEM (1/3) menu appears first.
 Turn [F2], select “STOR” using the MODE item, turn [F3], and set the preset memory number using the NO.
item.
 Press the [F4] switch (EXEC) to store the settings.
ＰＳＭＥＭ
１／３
ＭＯＤＥ
ＳＴＯＲ ＮＯ．
＊１０ ＥＸＥＣ
１－１０ ＲＥＣＬ
ＣＬＲ
An asterisk ( ) appears at the left of the number when data has been saved in the preset memory.