Pioneer DV-S969AVi - Manual (Page 96)

Additional information 09
96
En
HDMI troubleshooting
Problem Remedy
No HDMI audio output. • If the front panel HDMI indicator is lit:
– You won’t hear any sound from the HDMI output if the source
component is only DVI/HDCP-compatible.
– It is not possible to output SACD or copy-controlled DVD-Audio
CPPM sources from the HDMI connection.
• If the front panel i.LINK indicator is unlit then:
– Make sure that you’ve selected this player as the HDMI input in the
settings for the component you’re using. You may need to refer to the
instruction manual of the component to do this.
– Check that the HDMI cable is connected properly and that the cable
isn’t damaged.
– Check that components connected using the HDMI interface are
switched on and HDMI compatible. (
An HDMI connection can only
be made with components compatible with both DVI and High
Bandwidth Digital Content Protection (HDCP).)
– Check that the PURE AUDIO indicator is not lit. If it is, press the
PURE AUDIO button ( See also Front panel on page 26).
No HDMI video output • Make sure that you’ve selected this player as the HDMI input in the
settings for the component you’re using. You may need to refer to the
instruction manual of the component to do this.
• It is not possible to output SACD or copy-controlled DVD-Audio
CPPM sources from the HDMI connection.
• Check that the HDMI cable is connected properly and that the cable
isn’t damaged.
• Check that components connected using the HDMI interface are
switched on and HDMI compatible. (
An HDMI connection can only
be made with components compatible with both DVI and High
Bandwidth Digital Content Protection (HDCP).)
• Check that the PURE AUDIO indicator is not lit. If it is, press the
PURE AUDIO button ( See also Front panel on page 26).
• Make sure the resolution on this player matches that of the
component you have connected using HDMI. See
HDMI Settings
on page 73 to change the HDMI resolution.
No multichannel HDMI
audio. • Make sure the Audio setting in the HDMI menu is set to Auto (see
HDMI Settings on page 73 to do this).
• You can’t hear multi-channel DVD-Audio using the HDMI
interface. The signal will automatically be downmixed to stereo.
DV-59AVi.book(KU).fm 96 ページ ２００３年８月２０日 水曜日 午後６時４６分