Panasonic AW-E800 - Manual (Page 19)

-17-
• To connect the pan/tilt unit to the camera, use the
pan/tilt unit cable AW-CA50T15.
• Power is supplied from the pan/tilt unit.
1. Before connecting them, press the power
switch on the pan/tilt unit AC adaptor and the
ON/OFF switch on the hybrid control panel in
the OFF position, respectively.
2. Fix the camera securely to the pan/tilt unit using
the mounting adaptor.
3. Connect the 50-pin end of the pan/tilt unit cable
to the I/F Remote connector on the camera.
Connect the 15-pin end of the cable to the
pan/tilt unit.
4. Connect the pan/tilt unit to the hybrid control
panel with the 10BASE-T cable and coaxial
cable. For details, refer to the manual for the
hybrid control panel.
5. First switch on the pan/tilt unit AC adaptor, then
press the ON/OFF switch on the hybrid control
panel in the ON position. The camera and pan/
tilt unit can now be controlled from the hybrid
control panel.
■ CONNECTION OF DEVICES WITH CAMERA PAN/TILT CONTROL SYSTEM
T A L L Y
D C 1 2 V I N
A U X C O N T R O L
P R E V I E W I N O U T 6 / 1 O U T
BREVIEW MONITOR OUT
C O N T R O L C O N T R O L O U T P A N / T I L T C A M E R A
T D M U L T I P O R T H U B
G / L I N S-VIDEO OUT
ON
POWER
OFF
POWER
O I
FUSE(POWER)
FUSE FUSE
FUSE(LAMP)
FUSE FUSE
AC Adaptor
AW -PS300
VIDEO OUT
G/L IN
I/F REMOTE
OPTION CARD
IRIS
DC12V IN
MENU
ITEM/AWC
YES/ABC
NO/BAR
PAN/TILT CONTROL
CAMERA CONTROL
10BASE-T
Cable
Coaxial
Cable
Coaxial
Cable
VIDEO
Control Panel
AC Adaptor
AW-PS301
Pan/tilt unit AC
Adaptor AW-PS300
Hybrid control
panel
AW-RP501
Camera Mounting
Adaptor (Supplied)
Pan/tilt unit Cable
AW-CA50T15
Composite Video S VIDEO
Video
Monitor
LENS
ZOOM/FOCUS Cable
LENS
IRIS Cable
Pan/tilt unit
AW-PH300