Additional features, Troubleshooting, Cleaning and storage – Pelonis HR-0031 User Manual

Page 2: Specifications, Operating instructions

Advertising
background image

ADDITIONAL FEATURES

This heater has additional features:

Internal Safety Fuse - acts as back up protection to the Thermal Cut-Off Protection
System.

Convenient Carry Handle – allows for easy transport from room to room.

TROUBLESHOOTING

If your heater fails to operate, please follow these instructions:

Ensure that your circuit breaker or fuse is working properly.

Be sure the heater is plugged in and that the electrical outlet is working properly.

Check for any obstruction. If you find any obstruction, turn the heater “ OFF” . Unplug the
heater and wait a few minutes for it to cool down. Carefully remove the obstruction. Plug
the heater in and turn it on again by referring to the OPERATING INSTRUCTIONS.

NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE SEE THE
WARRANTY INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO OPEN OR
REPAIR THE HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD

CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS, PLEASE
CONTACT US BY REFERRING TO THE SERVICE & SUPPORT INFORMATION ON THE
FOLLOWING PAGE.

CLEANING AND STORAGE

It is recommended that the heater be cleaned at least one time during the operating season in order
to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH OFF AND
UNPLUG THE HEATER BEFORE CLEANING.
Be sure to save the box for off-season storage.

Turn the heater “ OFF” , unplug it and wait for the heater to cool down.

Use a dry cloth to clean only external surfaces of the heater.

Do not use any cleaning agents or detergents.

Never immerse the heater in water.

Pack the heater in the original carton and store it in a cool and dry place.

SPECIFICATIONS

Model No.: HR-0311
Voltage: 120V, 60Hz
Current: Maximum continuous draw: 12.5 Amps.
Output: 5200 BTUs
Power: LOW = 900 Watts, HIGH = 1500 Watts

Tolerances on all specifications: Approximately +5%, -10%.

OPERATING INSTRUCTIONS

Place the heater on a firm level surface free from obstructions, and at least 3 ft. away from
any wall and any other objects such as furniture, curtains, plants or combustible material.

With the Power and Setting Control “ A” in the ” MIN” position, the Power Indicator Light
“ B”

not illuminated

, and the heater

in

“OFF”status,

plug the heater into a grounded

120V outlet.

Turn the heater ”ON” by turning the Power and Setting Control “ A” clockwise to your
desired setting .The Power Indicator Light “ B” will illuminate.

The power setting operates at

1500 Watts.

Turn the heater ”OFF” by turning the Power Control to “MIN”.

The power and Setting Control “ A” can be use as

a

thermostat. Turn the “ A” to your desired

setting from “ MIN” to “ MAX” . Turning the “ A” clockwise will increase the “set” temperature;
turning the thermostat counterclockwise will decrease the “set” temperature.

When the room reaches a comfortable temperature, slowly turn the “ A” counter-clockwise
until the heater turns off. This is the point at which the thermostat setting equals the room
temperature. At this setting, the thermostat will automatically turn the heater on and off to
maintain this selected temperature.

CAUTION: This heater includes an Overheat Protection System that shuts the unit off if it
overheats due to abnormal conditions. At this time, the “C” Caution Indicator Light gets on. If
this occurs turn the heater “OFF”, unplug it, and inspect and remove any objects on or adjacent
to the heater. Allow it to cool for a few minutes, plug it back in, and resume normal operation.

B

A

Carry
Handle
(behind

IMPORTANT!

Your heater is equipped with a
polarized alternating current line
plug (a plug having one blade
wider than the other). This plug
will fit into the power outlet only
one way. This is a safety
feature. If you are unable to
insert the plug fully into the
outlet, try reversing the plug. If
the plug should still fail to fit,
contact your electrician to
replace your outlet. DO NOT
defeat the safety purpose of the
polarized plug.

Control Panel Functions

Power and Setting Control

Power Indicator Light

Caution Indicator Light

A

B

C

C

Advertising