Panasonic C7301U - Manual (Page 10)

CQ-C8401U/C8301U/C7401U/C7301U 19
English
General
18
General
CQ-C8401U/C8301U/C7401U/C7301U
The sound type each of which is adjusted with 7 bands
changes every time you press [SQ].
1. FLAT
(default)
2. ROCK
3. POP
Lights when activated.
SQ Selection Based on Genre
(SQ: Sound Quality)
4. VOCAL
5. JAZZ
6. CLUB
Notes:
¡ Setting of SQ, bass/treble and volume are influenced
one another. If the influence mentioned above causes
distortion to the audio signal, readjust bass/treble or
volume.
¡ Each SQ (except FLAT) level is changeable. ( a page
19)
You can make fine adjustments to the currently selected
SQ presetting in ROCK, POP, VOCAL, JAZZ, or CLUB in
accordance with your car type or taste.
1
Hold down [SQ] (Sound Quality) for 2
sec. or more.
The targeted SQ preset appears.
2
Adjust each frequency.
Note: If you press [DISP], the presetting is can-
celed. The presetting is active until another SQ pre-
set is called up.
[ [ ] : Higher frequency
[ ] ] : Lower frequency
q : Level Up
w : Level Down
3 Hold down [}] or [{] for 2 sec. or
more to confirm your adjustment.
Note: You can select a SQ preset to be targeted
with [}] and [{] (and [2]-[6] on the remote con-
trol).
4
Hold down [}] or [{] for 2 sec. or
more to confirm your adjustment.
The existing adjustment is overwritten with new
adjustment.
Notes:
¡ FLAT is not changeable.
¡ If no operation takes place for more than 10 sec-
onds, the display returns to the regular mode.
¡ This adjustment is executable in the AUDIO menu
as well. (
a page 34)
¡ If you hold down [BAND] for 2 sec. or more on
the SQ call-up screen, the presetting that is called
up can be turned into the default.
SRC CQ-C8401U SRC CQ-C8401U
Change of SQ Presetting