Plantronics M155 - Manual (Page 4)

PLT_M155
CONNECT TO YOUR PHONE
“Pairing” is the set-up process of
introducing your headset to your
phone. Before using your headset
for the first time, you must pair it
with your Bluetooth-enabled phone.
“Multipoint” lets you pair this
headset with two phones so you can
answer a call from either phone.
1. READY
First Time, Right Out of the Box:
Put on the headset and slide
power switch to turn it on. The
LED flashes red/white to indicate
pairing mode.
Pair New or Second Phone:
Turn on headset. Press Call
button until the LED flashes red/
white for pairing mode.
2. SET
Activate the Bluetooth feature
on your phone, then use phone
menus to “add,” “search” or “scan”
new Bluetooth devices.
Phones Have Different Menus to
Select from, for example:
iPhone: Settings > General >
Bluetooth > On (starts the search
for devices)
BlackBerry
® smartphone:
Settings/options > Bluetooth: On >
Search for devices
Android
™ :
Settings > Wireless & Networks >
Bluetooth: On > Scan for devices
3. CONNECT
Select “PLT_M155” from the list of
Bluetooth devices shown on your
phone.
If phone asks for a passcode, enter
four zeros (0000). You may see ****
on screen.
Some phones also ask to confirm
headset connection after pairing.
Headset LED will stop flashing red/
blue once successfully paired/
connected.
You can now make a call using your
phone’s keypad or voice-dialing
feature.