Palm Series 3 - Manual (Page 15)

E N D I N G A C A L L 11
U S E R G U I D E
If you miss a call, the indicator light on your
headset flashes blue and purple every six
seconds to alert you to the missed call. To
clear this alert, press the Call control
button.
When your headset is paired with your
phone and you make or answer a call on
your phone while your headset is turned off
(or is out of range of the phone), your
headset automatically tries to connect to
the call when you turn it on (or when you
bring it back within range of your phone). If
your headset does not automatically
connect to the call in this case, quickly
press the Call control button to connect.
If you want to stop using the headset and
use the earpiece or a wired headset during
a call, do the following:
Smartphone using Palm OS ® : Select
Cancel Bluetooth in Active Call View. To
return to using your headset, open the
Options menu and select Connect
Bluetooth.
Smartphone using Windows Mobile ® :
Press Menu (right action key) and select
Cancel Bluetooth. To return to using your
headset, press Menu (right action key) and
select Connect Bluetooth.
Ending a call
To end a call, press and release the Call
control button, or use the controls on your
smartphone to end the call. A short beep
sounds to confirm that the call has ended.
Using auto answer
If your headset is in the charging pocket
when it receives a call, the charging pocket
vibrates after a few rings.
•
Remove your headset from the charging
pocket to automatically answer the call.
• Return your headset to the charging
pocket to end the call.