Palsonic TFTV681U - Manual (Page 26)

Setting Picture
(continued)
23
Press MENU to display the menu main page.
The picture menu page will be displayed automatically.
Press to access the submenu.
Press repeatedly to select SIZE MODE item.
Press to select a desired aspect ratio.
You can select the image aspect ratio between FULL, ZOOM1, ZOOM2
and NORMAL.
1
2
3
4
Adjusting Screen Aspect
Press MENU to display the menu main page.
The picture menu page will be displayed automatically.
Press to access the submenu.
Press repeatedly to select NOISE REDUCE item.
Press to select OFF, WEAK or STRONG.
1
Reducing Picture Noise
2
3
4
FULL – In this mode the picture is progressively stretched toward each side of the screen.
ZOOM1 – This feature is recommended for viewing "letter-box" movie (picture with a black bar on the top and
bottom). If you watch a 4:3 picture in this mode, the picture will be expanded and some information at the top
and bottom will be lost.
ZOOM2 – In this mode the picture is vertically stretched toward upside of the screen so that when viewing
programs with title at the bottom, the bottom title can be revealed.
NORMAL – In this mode the picture is displayed without modification, in its native aspect ratio.
Sometimes a noisy picture may appear on the screen because of poor signal.
This function helps to enhance the picture quality by reducing the noise.
Freezing picture
Press the STILL button to hold on the image on the screen (the video sources still run). Press it again
to reactivate the image.
Note:
For the sake of protecting the screen, please DO NOT freeze a picture for a long time.
Note:
You may quickly switch the aspect ratio between FULL, ZOOM1, ZOOM2 and NORMAL by using the SIZE
button on the remote control.
Note:
You may quickly reduce the picture noise by using NR button on the remote control.