PQI mPack - Manual (Page 11)

1 19 9 Getting Started
ENG
1 18 8 Getting Started
Sony Phillips Digital Interface Function (SPDIF)
The mPack is capable of supporting 5.1 Digital Theatre Surround Sound
through the SPDIF port.
To connect an external speaker system to the mPack, complete the following
steps:
Inserting a CompactFlash (CF) Card
The mPack is built to accept CF cards directly (and other flash media cards
through the optional 4-in-1 adaptor) without the need for a computer.
To read data from a CF card, complete the following step:
Though the size and shape of A/V cables are identical, their features may
be different. Please use the cables provided by PQI, otherwise the product
may not function properly.
CAUTION
Though the size and shape of SPDIF cables are identical, their features
may be different. Please use the cables provided by PQI, otherwise the
product may not function properly.
CAUTION
Make sure that the CF card is correctly oriented when inserting it into the
card slot. Insert the card with its back side shown when the mPack screen
is facing front. If the card is inserted the other way, pins on the card slot
may get bent, causing damage to the card slot and making it unusable.
CAUTION
Insert the CF card into the card slot with the front, colored label facing
toward the back of the mPack.
To use the 4-in-1 adaptor, follow the steps included in its packaging.
You can upgrade firmware using a CF card. After turning the product off,
insert a CF card that contains a firmware upgrade file into the card slot
and turn the power on. The firmware is automatically upgraded. Once
upgrading is complete, the user settings may be changed. For more
information, please refer to the Firmware Upgrade section of this manual. NOTE
Connect the slender end of the SPDIF cable to the SPDIF port on the top
of the unit.
Connect the wider end of the cable to the Optical In of the speaker
receiver unit.