Phase Technology HP690i - Manual

© 2009 SoundTube Entertainment, Inc. All rights reserved. PN TS-HP690i REV 11.24.09
Key Features
• Patented BroadBeam ® waveguide tech-
nology delivers a consistent dispersion
pattern for maximum intelligibility and
edge-to-edge coverage (up to 10 kHz,
independently verified).
• One 165 mm (6.5 in.) treated fiber
woofer and one 36 mm (1.42 in.) convex
aluminum tweeter mounted to a pro-
prietary cast-aluminum M6 ™ baffle and
heat sink.
• 66-watt transformer and high output
(110.0 dB) for the sound reinforcement
and PA markets.
• Average sensitivity of 90.0 dB offers
high output capabilities and reduced
amplification costs.
• Weatherized components for indoor and
outdoor applications.
• Patented ZeroReflection™ enclosure
technology for optimal sound reproduc-
tion and cabinet rigidity.
• Includes hanging hardware with gal-
vanized steel cables and integrated
SpeedClamp ™ self-locking wire grip for
fast, easy and secure installation. Also
includes Euroblock connector
and terminal weather boot.
• Easy access 6-position selectable tap
switch for 25-, 70.7- and 100-volt applica-
tions with voice-coil-direct simplifies
ordering and inventory tracking.
• Optional accessory: AC-RS-SM6 bracket
for surface-mount applications.
• High-quality black or white paint finish.
Custom paint colors optional.
Description
The HP690i is a premium 6.5-inch, two-
way, ported, high-efficiency, high-SPL
loudspeaker for distributed or 8 ohm
applications. The HP690i incorporates
a dedicated 6.5-inch treated fiber driver
and high-power compression transducer
with a BroadBeamHP® waveguide to
deliver a consistent dispersion pattern
and superb intelligibility for the fore-
ground music, sound reinforcement and
PA markets. The HP690i incorporates a
66-watt transformer with a six-position
rotary switch and voice-coil-direct posi-
tion. Hanging hardware is included and
features a fast-action SpeedClamp™ for
easy and secure installation.
HP690i Open-Ceiling Speaker
Technical Information for System Engineers
Mounting hardware included Specifications: HP690i
System Type
Impedance (nominal) 1
Impedance (minimum) 1
Sensitivity dB @ 2.83 V/1 m
Sensitivity dB @ 1 W/1 m
2
Frequency Response ( - 3 dB) 3
Frequency Response ( - 10 dB) 3
Max. Program Power 4
Max. Continuous Power RMS 5
Max. Power SPL @ 1 m 6
Coverage Angle (-6 dB @ 2 kHz)
Coverage Angle (-6 dB @ 10 kHz)
Coverage Angle (averaged 2-10 kHz)
Directivity Factor (Q)
Directivity Index (DI)
Tap Selector
Transducer - Low-Frequency Driver
Transducer - High-Frequency Driver
Low-Frequency Voice Coil
Crossover Frequency
Network Type: Low Pass
Network Type: High Pass
Enclosure Material
Grille
Inputs
Colors
Included Accessories
Optional Accessories
Height
Diameter
Weight
Shipping Weight
Packaging
Regulatory - UL
Regulatory - CE
6.5-inch two-way, open-ceiling, ported (66-watt transformer
for 25/70.7/100-volt or voice-coil-direct)
8 ohms
5.4 ohms
90.0 dB
90.0 dB
112 Hz - 21 kHz
67 Hz - 22 kHz
200 W
100 W
110.0 dB
110º
90º
100º
4.5 (averaged 100 Hz - 10 kHz); 6.5 (2 kHz)
5.5 dB (averaged 100 Hz - 10 kHz); 8.1 dB (2 kHz)
Six-position rotary switch with voice-coil-direct
165 mm (6.50 in.) treated paper cone, cloth surround
36 mm (1.42 in.) titanium compression tweeter with
waveguide
34.0 mm (1.34 in.)
3.0 kHz
18 dB per octave, 3rd order
18 dB per octave, 3rd order
Injection molded ABS, glass fiber reinforced
Steel with powder-coat finish
Four-pin, 5 mm Euroblock for individual or daisy chain con-
nection
Black or white
Hanging hardware, Euroblock connector and terminal
weather boot
Surface-mount bracket (AC-RS-SM6)
363.5 mm (14.31 in.)
307.3 mm (12.10 in.)
8.4 kg (18.5 lbs.)
9.8 kg (21.5 lbs.)
One per box
UL 1480 and 2239 approved
Approved
Transformer Taps
70.7 V Output 100 V Output 25 V Output
66 W 108.0 dB 66 W 108.0 dB 9 W 99.5 dB
35 W 105.5 dB 35 W 105.5 dB 4.5 W 96.5 dB
19 W 103.0 dB 19 W 103.0 dB 2.3 W 93.5 dB
10 W 100.0 dB 10 W 100.0 dB 1.10 W 90.5 dB
5 W 97.0 dB
Impedance listed per IEC 60268-5 with
a minimum less than 80% the nominal
impedance
1 W 1 m sensitivity determined using nomi-
nal impedance
Frequency response measured in half or
full space as dictated by speaker mounting
configuration
Max program power is 3 dB above max
continuous power
Continuous power rating, EIA-426-B test
Max output based on max continuous power
1
2
3
4
5
6