The remote control does not work, Recording does not start immediately, White spots or shadow images (noise) – Panasonic TC-L32C22 User Manual

Page 46

Advertising
background image

46

FAQ

Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer or Panasonic Service Center for assistance. For
details (p. 50, 51)
For additional assistance, please contact us via the website at:
www.panasonic.com/contactinfo
www.panasonic.ca

White spots or
shadow images
(noise)

Check the position, direction,

and connection of the antenna.

Interference or

frozen digital

channels

(intermittent sound)

Change the direction of antenna for

digital channels.

Check “Signal meter” (p. 35).

If the signal is weak, check the
antenna and consult your local
dealer.

The LCD panel moves

slightly when it is

pushed with a finger.

A clattering sound

might be heard

This is not a malfunction.

There is some looseness around

the panel to prevent damage to the
panel.

The remote control does

not work

Are the batteries installed correctly? (p. 7)

Are the batteries new?

Pictures from external

equipment are distorted when

the unit is connected via HDMI

Is the HDMI cable connected properly?

(p. 27, 39)

Turn Off the TV unit and equipment, then

turn them On again.

Check an input signal from the equipment.

(p. 44)

Use equipment compliant with

EIA/CEA-861/861B.

When the channel is changed on

an STB that is connected with

HDMI, “HDMI” may be displayed

on the top left of the screen

This is not a malfunction.

Recording does not

start immediately

Check the settings of the recorder. For

details, read the manual of the recorder.

Advertising