Reference, Frequently asked questions – Panasonic DMR-EH75V User Manual

Page 81

Advertising

RQT8346

Reference

Frequently asked questions

Refer to the following items if you have any doubts about unit operations.

Set up

Page

Disc

Recording

What equipment is necessary to play
multi channel surround sound?

≥You cannot playback multi-channel sound on this unit without other equipment. You must

connect this unit with a HDMI cable or an optical digital cable to an amplifier with a built-in
(Dolby Digital or DTS) decoder.

≥An amplifier supporting CPPM and the HDMI standard version 1.1 must be connected to

this unit to play multi-channel audio on a DVD-Audio.

21, 22

—

Are the headphones and speakers
directly connected to the unit?

≥You cannot directly connect them to the unit. Connect through the amplifier, etc.

Is my television progressive output
compatible?

≥All Panasonic televisions that have 480p input terminals are compatible. Consult the

manufacturer if you have another brand of television.

—

The television has S VIDEO IN
terminal, COMPONENT VIDEO IN
terminals and HDMI IN terminal.
Which should I connect with?

≥The quality of the output picture becomes finer in the following order.

- VIDEO IN terminal, S VIDEO IN terminal, COMPONENT VIDEO IN terminals and

HDMI IN terminal. However it will take longer to startup when this unit is connected with
the HDMI IN terminal.

—

Can I play DVD-R, DVD-R DL,
DVDRW (DVD-Video format), +R,
+R DL and +RW recorded with this
unit with other equipment?

≥You can play on compatible equipment such as DVD players after finalizing the disc on

this unit. It is not necessary to finalize +RW. However, depending on the condition of the
recording, the quality of the disc and capabilities of the DVD player, play may not be
possible. To enable play on other players, please use “Create DVD Top Menu” in the
DVD Management.

≥If you play a DVD-R DL or +R DL are compatible equipment.

—

Can I play DVD-Video, DVD-Audio
and Video CDs bought in another
country?

≥You can play them if the video standard is NTSC.
≥However, you cannot play DVD-Video if their region number does not include “1” or

“ALL”. Refer to the disc’s jacket for more information.

—

Cover

Can a DVD-Video that does not have
a region number be played?

≥The DVD-Video region number indicates the disc conforms to a standard. You cannot

play discs that do not have a region number. You also cannot play discs that do not
conform to a standard.

—

Please tell me about disc compatibility
with this unit.

≥This unit records and plays DVD-R, DVD-RW (DVD-Video format), +R, +RW and plays

DVD-RW (DVD Video Recording format). You cannot directly to DVD-R DL, and +R DL
discs with this unit, you must first record to the HDD. And then copy from the HDD to disc.

≥This unit also records and plays high-speed recording compatible DVD-R, DVD-R DL,

DVD-RW, +R, +R DL and +RW discs.

5–7

—

Please tell me about CD-R and
CD-RW compatibility with this unit.

≥This unit plays CD-R/CD-RW discs which have been recorded in one of the following

standards: CD-DA, Video CD, MP3, DivX and still pictures (JPEG/TIFF). Close the
session after recording.

≥You cannot write to a CD-R or CD-RW with this unit.

—

Can I record from a commercially
purchased video cassette or DVD?

≥Most commercially sold video cassettes and DVD are copy protected; therefore,

recording is usually not possible.

—

Can I record digital audio signals
using this unit?

≥You cannot record digital signals. The digital audio terminals on this unit are for output

only. (The audio recorded from a digital video camcorder using the DV camcorder
recording function, for example, is recorded digitally.)

—

Can a digital audio signal from this
unit be recorded to other equipment?

≥You can record if using the PCM signal. When recording DVD, change the “Digital Audio

Output” settings to the following from the Setup menu.
- PCM Down Conversion

- Dolby Digital

PCM

- DTS

PCM

However, only
- As long as digital recording from the disc is permitted.
- As long as the recording equipment is compatible with a sampling frequency of 48 kHz.

≥You cannot record MP3 signals.

—

Can I switch to SAP during recording?

≥With HDD and DVD-RAM, you can, and the audio recorded also changes. Just press

[AUDIO].

≥With DVD-R, DVD-RW (DVD-Video format), +R, +RW you cannot. Change before

recording with “Multi-channel TV Sound (MTS)” in the Setup menu.

Can I high-speed copy to a disc?

≥Yes, you can.

Depending on the disc type, the maximum speed varies. Refer to the table (Approximate
copying times).

l/Clo

ck se