Image repeat, Chap te r 2 mo re m e nu s f eat ur es – Panasonic DP-C406 User Manual
Page 84
84
C
hap
te
r 2
Mo
re
M
e
nu
s
F
eat
ur
es
Image Repeat
Create multiple images on a sheet from a single original.
z
Dotted lines can be printed between each of the copied images. Refer to Copier Settings in the Operating
Instructions (For Function Parameters) of provided CD-ROM.
z
This function can be selected when the original is placed on the Platen Glass.
z
As the original is placed on the Platen Glass, the position of the original may be erroneously detected if
influenced by ambient light.
z
If the margin around the original is 5 mm wide or less, the original may not be correctly detected, and the copy
image may be unclear.
1
Open the ADF more than 45 degrees,
and place original on the Platen Glass,
and then leave the ADF open.
z
Refer to Placing Originals (see page 6).
2
Press the Copy key if the machine is
set to other function mode.
3
Select “More Menus”.
4
Select “Zoom / Effects”, and then
select “Image Repeat”.
5
Select the desired type of paper, and
then select “OK”.
6
Enter the desired number of copies.
7
Press the Start key.
z
After finishing copying, press the Reset key to
return to the initial screen of the currently active
mode.
The minimum size of the
original is 20 mm x 20 mm.