Panasonic CF-08 - Manual (Page 31)

31
„ When terminating the connection
Perform the following operation.
z
Tap [Start] - [Log Off] - [Log Off].
<Only when making connections with Microsoft ®
Remote Desktop Connection>
You can terminate the connection using the following
operation.
z Tap (A), and when the message appears, tap .
CAUTION
z If you tap [Start] - [Shut Down], the power for the server itself will be turned off.
Make the settings (only for the Supervisor)
„ When settings have been changed
Before turning off the wireless display, save (back up) the settings making refer-
ence to step
9 in “First-time Operation” (Î page 27).
„ When deleting settings
Perform the following procedure.
A Double-tap on the desktop and double-tap [Flash Delete].
B Connect your wireless display to a power outlet. (Î page 19)
C Tap [Delete Backup].
When the confirmation message appears, tap [Yes].
Deleting data will start.
D When the message “Backup data has been deleted.” appears, tap .
NOTE NOTE
z When you turn on the wireless display next time, the calibration screen will
appear. (Î page 20)
„ When returning the wireless display to its condition at the time of shipment
Perform the following procedure while the wireless display is turned off.
A Connect your wireless display to a power outlet. (Î page 19)
CF-08.book 31 ページ ２００６年４月６日 木曜日 午後６時３８分