Planet Technology 8-Port IP Power Manager IPM-8002 - Manual (Page 47)

Telnet Connection parameter enabling or disabling the terminal to the server This is the
application (Telnet) control process. (e.g. telnet 192.168.1.1). The
user may configure the Telnet protocol to use a port number other
than the standard Telnet port (23).
HTTP Support ion with the IP Power Manager. Enable/Disable the HTTP connect
The user may configure HTTP protocol to use a port number other
than standard HTTP port (80).
SNMP Support ection with the IP Power Manager.
er
Enable/Disable the SNMP conn
The user may configure the SNMP protocol to use a port number oth
than the standard SNMP port (161).
6.4.3 Access Control
d when the security level is “Administrator”. It prevents Configuration of this page is allowe
unauthorized network access to the IP Power Manager. There are 2 kinds of type for "Access
Type", "Permitted", and "Denied". It is need to set the first item for its "IP Address" to
"255.255.255.255" and "Access Type" to "Permitted" as default value in order to let user is
able to connect to the IP Power Manager.
Option Description
dex The index number of the entry in the table. In
IP Addre
- 33 -
ss ent station's IP address. "0.0.0.0" means entry not
means the client with the
The managem
configured. (e.g. An entry "192.168.7.255"
IP address within the range from "192.168.7.0" to "192.168.7.255"
become the management station with the access type set by
Administrator. "255.255.255.255" grant the access right to all IP.