Hyundai HGP-4000X - Manual (Page 13)

[18] [19]
BASIC FUNCTIONS
1
MISSED CALL DISPLAY
1
HOW TO ADJUST VOLUME
You can adjust the volume in two ways: by using the volume
control keys on the side of the handset, or by using the menu.
BASIC FUNCTIONS
1
HOW TO ANSWER CALLS
AUTO ANSWER
2
If you set up the AUTO ANSWER function in
advance, the call will be answered after the
selected number of rings. (Refer to page 34)
VIBRATOR
CALLER ID FUNCTION
The Caller ID number is saved in the call log.
CALL WAITING FUNCTION
MISSED
XX CALLS
PM XX:XX
PREV
When the phone rings or LED blinks, press any
key except Volume or [ ].
To end the call, press [ ].
This function allows an incoming call to automatically be answered
after a set number of rings.
To enable this function, press [ ], [5], [2].
When there is an incoming call, the
caller’s phone number is displayed
on the screen.
This function notifies you there is an incoming call when you
are on the phone.
l To answer the call, press [ ] when you hear the beep.
l To switch back to the first caller, press [ ] again.
Displays the number of missed
calls and the time the call was
missed.
l The message will be
cleared when you press
the [ ] or [ ] key or
[ ].
Adjust volume by using the volume control keys
during the following operations.
l During a Call : Earpiece volume adjustment.
l Standby Status : Ringer volume adjustment.
l When the Phone Rings : Ringer volume
adjustment.
l Call status in hands-free : Hands-free vol-
ume adjustment. Press [ ] when the
phone rings and it will mute the ringer.
This function disables the ringer and vibrates the phone any time
an incoming call is in process. To enable this function press [ ],
[5],[7] and select VIBRATE by pressing the “up” and “down” keys
at the upper left side of the phone.
hgp-4000xl 8/24(¡fl± π ) 2001.7.21 3:50 PM Page 24