Hyundai H-CMD4001 - Manual (Page 34)

34
3. Audio setup:
[1] Down Mix setup:
Press the DOWN arrow to enter the sub-menu. If you want analog stereo signals, set the sound mode to
“STEREO”.
If you want to have Dolby Pro Logic stereo (the decoded signal will create a 2ch reality simulating effect),
select ”LT/RT”
[2] Dual Mono setup:
Select the type of output of the Left and Right audio output connectors. Stereo is normal Stereo, L-Mono is all
sound on the Left Audio output, R-Mono is all sound on the Right channel. The “Mix-Mono” function only
works when a DVD is being played in DTS 5.1 mode.
[3] Dynamic setup:
This function is to adjust the linear compression rate to obtain the different compression results of the signals.
Standard set to “OFF”
4. Parental setup: