PYLE Audio PLDBT30U - Manual (Page 3)

2
Safety precautions
CAUTION
Be sure the unit is connected to a 12V
DC power with a Negative Ground.
Do not install the unit in places where
it is exposed to direct sunlight, high heat
or humidity, water splash or dust.
To change fuse, please use the same
one in specification and capacity.
When changing fuse, please do it
after pulling down power wires to avoid
short circuit.
If the unit does not seem to be working
properly, please press the reset button to
resume the function.
Do not watch videos when driving.
To prevent electric shock, etc. please do
not let
If you smell or see smoke, turn off the
power immediately and consult the place
of purchase.
Be careful not to drop or shock the unit
strongly.
Do not touch the liquid crystal to avoid
hurting yourself. If your clothes are stained
by it, please clean them with soap
immediately.
For your driving safety, please link your
brake detecting wire with low power
level, and keep it controlled by manual
brake switch. wire should be high power
level and the unit can not play DVD or
VCD disc.
the metal goods(silver,coin,tools..)
fall into the installation.
To prevent damage to the machine,
take the following precautions:
WARNING
To prevent injury or fire, please
take the precautions: following
PRECAUTIONS
When driving a car, reduce the
volume to be more aware of the
road traffic.
Avoid getting the speakers and
disc wet from water or dampness
while cleaning the car.
Do not park your car in the direct
sunlight and turn on the unit after it is
cooling down in the car.
Protect your mechanism, and do not
put it close to magnet, screwdriver or
other cohere stuff.
If you do not comply with the above
items, it may cause abnormal running
and system trouble.
Please Note: