Panasonic CinemaVision PT 56HX40 - Manual (Page 9)

8
I NSTALLATION
Optional Equipment Connections (Cont.)
Amplifier Connection (TO AUDIO AMP)
To listen through a separate stereo system, connect an external audio amplifier TO AUDIO AMP
inputs on back of television.
Note: TO AUDIO AMP terminals cannot be connected directly to external speakers.
Audio Adjustments
1. Select SPEAKERS ON located in the on screen AUDIO menu .
2. Set amplifier volume to minimum.
3. Adjust PTV volume to desired level.
4. Adjust amplifier volume to match the PTV.
5. Select SPEAKERS OFF & VARIABLE AUDIO OUT from AUDIO menu to control
speakers from the PTV or select FIXED AUDIO OUT to control speakers from the
external amplifier.
6. Volume, mute, bass, treble and balance are now controlled from the PTV, if you select
VARIABLE AUDIO OUT mode.
Program Out Connection (PROG. OUT)
To use the PTV audio and video with optional video equipment, use PROG. OUT and TO
AUDIO AMP terminals on the back of the PTV.
Procedure
1. Connect optional video equipment to PROG. OUT video and TO AUDIO AMP R/L
Audio terminals.
2. PROG OUT terminal display is the same as the on screen display.
3. See optional equipment manual for further instructions for recording or monitoring.
SPLIT
OUT
L R
TO AUDIO AMP
INPUT 1
AUDIO
S-VIDEO VIDEO
INPUT 2
INPUT 3
PROG .
OUT
ANT 2
ANT 1
CENTER CHANNEL INPUT
12
Ω 50W (DIN) MAX
P
R
P
B
Y
VIDEO
COMPONENT VIDEO INPUT
1
L R
R-AUDIO-L
2
CABLES NOT SUPPLIED
VCR
TERMINALS ON BACK OF PTV
OR
MONITOR
B0342E Production.fm Page 8 Wednesday, February 7, 2001 11:10 AM