Panasonic KX-BP800 - Manual (Page 76)

76
Print Board Operations Check
After assembling the print board, perform the procedures presented in the following table to make sure it functions
properly.
■ Normal print board operations check
Step
Normal print board operations (points to check)
Multiple copy/
error display
Other points to check
1
Turn on the power switch.
" " flashes after
" " lights up.
2 Open the printer door and attach the supplied
thermal transfer film, then close the printer door.
C
Installing Thermal Transfer Film procedure
(refer to page 14)
" " flashes.
3 Open the paper cover and insert ordinary Letter
test paper, then close the paper cover.
C
Loading Copy Paper procedure
(refer to page 16)
" " lights up.
4
Open the printer door. " " flashes.
5
Close the printer door. " " lights up.
6 Press . C Does the screen film surface
feed smoothly
?
C Are there any strange noises?
7 Use the supplied marker to draw a large
filling the entire copyable area of the
screen film surface.
C Copyable area (refer to page 9)
Press twice. (will add to 3 copies)
C " " will be displayed.
Press .
" " lights up.
C Are three copies made?
C Is the entire readable area
printed?
C
During the copying process, are
there any strange noises or
paper jams? Are multiple sheets
of paper fed through at the same
time?
8 Press to move the screen film surface.
Write letters, etc. with the marker.
Press once.
Press .
C Has the darkness indicator light
turned on?
C
Is the image copied properly?
C Are there strange markings on
the copy sheet (e.g., stripes or
lines)?
9
Press once .
Has the darkness indicator light
turned off?
10
Press . 1 2 Are two screens copied properly?
B
If the unit fails on any of the check points, please contact your dealer.