Pentax R-322N - Manual (Page 17)

P14
2 DISPLAY AND KEYBOARD
2-3 Function Key
Display F. Key Description
Mode A
MEAS F1 Pressing this key one time measures the distance and
measurement type can be selected by Initial Setting 2.
Pressing this key twice measures the distance by cm
unit and another measurement type can be selected by
Initial Setting 2.
[TARGET] F2 Select the target type by following order.
SHEET/ REFRECTORLESS /PRISM
(Reflectorless type instrument)
SHEET/PRISM/REFRECTORLESS
(Prism type instrument)
[0 SET] F3 Resets the horizontal angle to 0 0' 0" by pressing twice.
[DISP] F4 Switches the display composition in the order
"H.angle/H.dst./V.dst.", "H.angle/V.angle/S.dst." and
"H.angle/V.angle/H.dst./S.dst./V.dst.".
[MODE] F5 Switches the screen between MODE A and MODE B.
Mode B
[S.FUNC] F1 PowerTopoLite
[ANG SET] F2 Brings up the angle setting screen for setting angle-
related parameters
(H.ANGLE/%GRADE, H.ANGLE INPUT and R/L
REVERSE).
[HOLD] F3 Pressing this key twice retains (holds) the horizontal
angle shown on the display.
[CORR] F4 Brings up the screen for changing the Target constant,
Temperature, Pressure setting.
Other functions
[ ] F1 Moves the cursor to the left.
[ ] F2 Moves the cursor to the right.
[ ] F1 Goes back five Items on the screen
[ ] F2 Goes forward five items on the screen.
RETICLE F3 Changing the Reticle illumination when pressing Illumination key
[ ] F3 Moves the cursor up
LCD F4 Changing the LCD contrast when pressing Illumination key
[ ] F4 Moves the cursor down
ILLU F5 Changing the LCD illumination when pressing Illumination key
[CLEAR] F5 Clear the figure
[SELECT] F5 Open the selection window