Panasonic PT 56DLX76 - Manual (Page 20)

For assistance, please call : 1-888-VIEW PTV(843-9788) or, contact us via the web at: http://www.panasonic.com/contactinfo
20
Installation (continued)
IR Blaster Connection
IR Blaster (Supplied)
Infrared emitter
Video recorder (VCR)
The Projection Display converts
scheduling data displayed on the TV to a
remote control signal and sends it
(VCR)
No need to set recording time or
channel on the video recorder
Setting of the recording time,
channel, recording mode, etc.
The TV acts as a proxy for some remote control operations of the VCR
IR Blaster
Connecting the IR Blaster allows the Projection Display to send remote control signal commands to your VCR.
This, along with the TV GUIDE feature on this set, lets you easily schedule recordings of digital programs. Place
the signal-emitting area of the IR Blaster near the signal-receiving area for the Remote Control on the VCR.
Top shelf of TV stand
Mount with two-sided tape
Signal-emitting area
Signal-receiving area
of Remote Control
(VCR)
(VCR)
Signal-receiving area of
Remote Control
Note:
• To schedule a recording using TV Guide with IR Blaster, you must select Line-1 (L-1) on the VCR and then turn the VCR off.
(Refer to the VCR Operating manual.)
<Example 1> <Example 2>
Signal-emitting area