POLAR M52 - Manual (Page 6)

13 12
SETTING USER 1 or 2
If you are in the Time of day display start from
User information.
In models M51 and M52 you can set two
users’ preferences. This function is
practical e.g. for another family member.
Make the settings ready for both users:
when you start exercising, just select your
personal user id 1 or 2.
USER appears, 1 or 2 is flashing.
1. Press SCROLL UP or
SCROLL DOWN to
select USER 1 or USER 2.
2. Press START/STOP/OK to lock your selection.
You have now selected the user id. All settings
are made to the selected user.
In File, Measure, Options and Fitness test main
modes you can change the user id by pressing and
holding
SCROLL UP.
If you want to disable the user id 2, set the weight of the
user 2 to zero.
Continue by setting your weight or return to the Time of
day display by pressing and holding START/STOP/OK.
SETTING WEIGHT
If you are in the Time of day display start from User
information. Press START/STOP/OK until
KG or LBS appears and the digits of kilograms/pounds are
flashing.
1. Press SCROLL UP or
SCROLL DOWN to adjust your
weight.
2. Press START/STOP/OK to lock your selection.
You have now set your weight.
You can change the weight unit between kg and lbs
in watch settings.
24 h time mode -> kg
12 h time mode -> lbs
Continue the user settings or return to the Time of day
display by pressing and holding START/STOP/OK.
SETTING HEIGHT
In models M51 and M52 you need to set your height.
If you are in the Time of day display start from User
information. Press START/STOP/OK until
CM or FT / INCH appears and the digits of centimetres/feet
are flashing.
1. Press SCROLL UP or SCROLL DOWN to adjust your
height.
2. Press START/STOP/OK to lock your selection.
You have now set your height.
You can change the height unit between cm and
ft/ inch in watch settings.
24 h time mode -> cm
12 h time mode -> ft
Continue by setting your age or return to the Time of day
display by pressing and holding START/STOP/OK.
SETTING AGE
If you are in the Time of day display start from User
information. Press START/STOP/OK until
AGE appears and the digits for years are flashing.
1. Press SCROLL UP or
SCROLL DOWN to adjust your age.
2. Press START/STOP/OK to lock your selection.
You have now set your age.
Continue by setting your sex or return to the Time of day
display by pressing and holding START/STOP/OK.
SETTING SEX
If you are in the Time of day display start from User
information. Press START/STOP/OK until
SEX appears and FEMALE/MALE is flashing.
M52 man GBR/D 5/1/01, 9:11 12-13