Features summary, Advanced features, How to set menu options programming table – Panasonic KX-FP152 User Manual

Page 52

Advertising
background image

Features Summary

52

Advanced features

!

How to set menu options

Programming table

Code

#22

To print the journal report
automatically for fax communications.

AUTO JOURNAL
MODE=ON

[±]

ON

OFF

To send a document:
1. Insert the document.
2. Follow steps 1 and 2 above.
3. Press

or

to select “ON”.

4. Press

.

5. Enter the fax number.
6. Press

.

7. Enter the transmission start time.

Press

to select “AM” or “PM”.

8. Press

.

9. Press

.

To cancel after programming,
press

then

.

SET

STOP

MENU

SET

SET

SET

“NEXT FAX”: This setting is effective
only for the next attempted fax
transmission. After transmission, the
unit will return to the previous setting.
“ERROR”: When the previous fax
transmission fails and you redial
the same number.

This feature is not available for
broadcast transmission.

The calling charge may be higher.

#23

If you have difficulty sending an
overseas fax, activate this feature
before starting transmission. This
feature makes sending documents
easier as the transmission speed is
slowed down.

OVERSEAS MODE
MODE=ERROR

[±]

Display & Feature

Settings

How the unit operates

#25

To send a fax automatically at a
specified time.
This allows you to take advantage
of low-cost calling hours offered by
your telephone company.

The setting can be reserved to
take place up to 24 hours in
advance.

DELAYED SEND
MODE=OFF

[±]

NEXT FAX

ERROR

OFF

ON /
fax no. /
hh:mm

OFF

(The default setting is in bold type.)

“ON”: The unit will print the journal
report automatically after every 30
new fax communications (p. 31).

Note:

Step 3 may be slightly different depending on the
feature.

See page 49 for more details.

1. Press

.

2. Press

or

until the following is

displayed.

Display:

Press

and press

or

until

the desired feature is displayed.

SET

ADVANCED MODE

PRESS SET

MENU

#26

To print the Caller ID list
automatically.

AUTO CALL. LIST
MODE=ON

[±]

ON

OFF

“ON”: The unit will print the Caller
ID list automatically after every 30
new calls (p. 25).

3. Press

or

until the desired setting

is displayed.

4. Press

.

5. Press

.

MENU

SET

Advertising