Hyundai H-CDM8070 - Manual (Page 12)

12
Preset Volume level
Press the SEL button for 2 Seconds, the Display wills how TA SEEK. Continuously press the SEL button to choose the options in the
MENU, until VOL LAST is displayed.
In this mode the unit will be turned on with the same volume level at which the unit was shut down the last time.
You can rotate the SEL Button to choose to choose VOL ADJ. Press the SEL Button to confirm, then A-VOL will be displayed. At
this time rotate the Volume Control to set the volume level you preferred. This will be the preset sound level for unit. Then every time
the unit will be turned on with this volume level.
Leave the unit idle in order for the new setting to take effect
Choose Radio Band
Press the BAND button to operate the radio function. (Even when CD is playing)
Total 3 sets of FM Band (FM1, FM2, FM3)
Total 2 sets or MW Band (MW1, MW2)
Each set of the band can be stored up to 6 preset stations, making total 30 preset memory stations.
Radio Tune/ Seek Function
In Radio Mode, rotate the volume knob to manually adjust the radio frequency.
Rotate the volume knob for more than 1 second, the radio will seek to the next up or down strong and clear
frequency station. Repeat this action to seek for other desired stations.
Automatic Store / Preset Scan
(1) AUTOMATIC SCAN & STORE
Press "F/PS" button for more than 3 seconds, the receiver will automatically scan and save stations for the 3 FM
bands.
(2) RESET
Press "F/PS" button for less than 1 second, the receiver will reset the station setting to the default. User has to scan and save
all the stations again.