Panasonic WV-NP1004 - Manual (Page 17)

17
Adjust the Flange-Back Length
Before adjusting the flange-back length, adjust the lens first. (
→ page 11)
Use the operation buttons on the camera ( → page 10) to adjust the flange-back length.
The flange-back length can also be adjusted on the [Camera] tab of the "Camera setup" page. ( → page 18)
Step 1
Adjust the angular field of view while monitoring the video monitor, then press the [SET] button.
Step 2
The focus position will be displayed at the bottom of the window and the flange-back length will be automatically adjusted.
Step 3
When it is necessary to adjust the flange-back length minutely after the auto adjustment of the flange-back length, adjust by
pressing the [LEFT] or [RIGHT] button.
Notes:
• The displayed focus position will disappear if no operation is performed for 10 seconds or more.
• The flange-back length position will set to the default position for the CS-mount by pressing both the [Left] and [Right] but-
tons for 2 seconds or more.
NEAR FAR
INDICATOR 255 FOCUSING