Panasonic MW-20 - Manual (Page 22)

22
VQT2Z87
Using with your PC
Photo fi les can be exchanged among this unit’s internal
memory, SD and computer.
Always use a genuine Panasonic USB connection cable
(K2KZ4CB00015; optional).
System confi gurations required
OS for PC
Windows ® 7
Windows Vista ®
Windows ® XP
Mac OS X
Port
USB port
•
•
•
•
•
Operations are not necessarily guaranteed for all
computers.
Data exchange with iPod/iPhone is not possible.
To connect to a PC
Turn the unit off.
Start up the computer.
1. Confi rm the direction of the USB connection
cable and insert it to the USB port of this unit.
Back of product
B A
Insert it fully.
A USB port
B USB connection cable (optional)
2. Insert the USB connection cable to the computer.
3. Turn this unit on.
4. Press [e, r] to select the USB connection
memory (“Internal Memory” or “SD Card”) and
press [OK].
This unit functions as a reader/writer and is
recognized as an external device of computer.
To remove the USB connection cable
Remove the cable using the safely remove hardware on the
task tray of the PC.
If the remove icon is not displayed, check that “ACCESS” is
not displayed on the unit and remove it.
Note
Keep the USB connection cable as far away as possible
from other electric appliances when using.
The iPod/iPhone cannot be charged while connecting with
the computer.
You cannot operate this unit while connecting with the
computer. If the USB connection cable is removed, this
unit is turned off.
When switching the USB connection memory, remove the
USB connection cable once, then reconnect it and perform
from the beginning.
•
•
„
•
•
„
•
•
•
•
To exchange photo fi les with a computer
Open the folder to exchange photo fi les on the computer.
Connect this unit to the PC.
Insert the SD card.
1. Select “Internal Memory” or “SD Card” in step 4
(¼left).
2. Open “Removable Disk” in “My computer” of your
PC.
There is the photo folder of this unit or SD card.
For Windows Vista
® or Windows ® 7, open
“Removable Disk” in “Computer”.
For Macintosh, this unit’s drive is displayed on the
desktop.
•
•
•
3. Open the photo folder on this unit and exchange
fi les between the folders.
Folders and fi les can be dragged and dropped. •
Note
If you remove and insert the USB connection cable or SD
card while “Accessing Do not remove the card or cable.”
message is displayed, the data on the SD card may be lost
or damaged.
If you make multiple USB connections or use hubs with
1 computer, malfunction may occur.
If you are using the 10.2 or older version of Mac OS X,
set the write-protect switch of SDHC memory card to the
“LOCK” side when importing photos from the SDHC card
to the computer.
When this unit is connected, do not use the format function
of the computer to format this unit’s internal memory or SD
card.
Recording and operating problems may occur on some
computer systems.
Please note that Panasonic and Panasonic dealers cannot
be held liable for any lost photo data or other direct or
indirect damage except in cases of intentional or gross
negligence.
„
•
•
•
•
•
•
•